Break It and Make It: A Glass Fusing Session in Everett

The fun here is in turning small pieces of glass into a design of your own. At FEELartistic Studio in Everett, you’ll learn basic techniques, break glass, and arrange it on a six-inch clear square before the studio fires your work.

I like two things especially: you make your own design, rather than copying a set project, and the group is capped at six, which should leave room for individual guidance. Jay is named as an instructor, though you should not assume he will lead every session.

The main consideration is timing: your artwork will not be ready when class ends. The studio needs to fire it first, so plan to pick it up later or arrange shipping, and check the timing before you book.

• A six-inch canvas: Your project begins with a square of clear glass.
• A hands-on process: You’ll break glass into smaller pieces and arrange them into your own design.
• Color choices: The studio provides transparent and opaque glass in a range of colors.
• Beginner-friendly instruction: The class includes a demonstration and step-by-step guidance.
• A small group: No more than six participants can take part.
• A delayed finish: The studio fires your piece after class, so it must be collected or shipped later.

From clear square to glass design

This is a make-something class, not a demonstration where you watch an artist work while you sit back. You start with a six-inch square of clear glass, then use supplied tools to break other glass into smaller pieces and build a pattern on top.

That simple format has a nice advantage: you can make choices as you go. You might favor orderly shapes, a loose arrangement, or a mix of colors and textures. The class offers transparent and opaque glass, though the exact selection can vary. One participant would have liked more colors, so if a broad palette matters to you, ask the studio what is available before booking.

The aim is a contemporary fused-glass piece. You do not need to arrive with a design prepared, and the class is open to beginners as well as people who have taken an introductory class before. If you have made glass art in the past, think of this as a chance to refresh the basics and try a new arrangement.

A 90-minute class with room to ask questions

The session lasts about an hour and a half. It begins with an introduction, followed by a demonstration of the tools and techniques you will use. Then you work through the process with guidance, breaking the glass and arranging the pieces on your clear base.

The time is short enough to fit into a half-day plan, but it is not an open studio session where you can keep adjusting your design indefinitely. You will want to make decisions as you work. If you tend to deliberate over every color and shape, it may help to arrive with a loose idea, while staying open to changing it once you see the materials.

The class is limited to six people. That small cap is useful in a hands-on setting, where you may want help with a tool or a second opinion on your layout. It also makes this a reasonable option for a family or a few friends who want to make their own pieces side by side. The activity is open to most participants, and service animals are allowed.

Jay is named as an instructor at the studio. If he is leading your class, the available information points to clear instruction, but the instructor for a particular date is not guaranteed.

What the glass-fusing process involves

You receive a clear six-inch square, glass, cutting tools, and other supplies. The studio also provides access to transparent and opaque colored glass. After the introductory guidance, you break glass into smaller pieces and arrange those pieces on the clear square to form your design.

The process gives you a balance of structure and choice. The instructions help you understand what to do, while the design itself is yours. That makes the class more engaging than a project where everyone follows an identical pattern, but it also means you are responsible for deciding how your piece should look.

The supplied information does not specify the exact cutting tools or techniques used, so you should not expect a particular method or a set list of patterns. The instructor demonstrates a variety of techniques and guides you through the steps. If you have concerns about using the tools, ask for help before you begin.

Your artwork needs a second stage

When you finish arranging the pieces, the work is not yet a completed fused-glass object. The studio fires the design after class, so you leave without the finished piece in hand. It will be available for pickup or can be shipped, but shipping costs and arrangements are not specified.

Allow time between the class and getting your work back. The stated timing varies: the studio description says a few weeks, while one participant expected pickup or shipping within a few days. Because those estimates do not match, ask FEELartistic Studio for the current turnaround before you book, especially if you are making the piece as a gift or have a deadline.

This delayed finish is not a flaw in the activity, but it does affect what you should expect from the day. You leave with the design made, not a ready-to-carry-home keepsake. If the most important part for you is taking home a finished object immediately, this may not be the right craft class.

Who will get the most from the session

This is a good fit if you want an approachable creative activity and like the idea of making something personal without needing prior experience. The step-by-step format is designed for beginners, and returning students can use the class as a refresher. It also suits families and friends who want to make individual designs together.

The activity is less suited to someone looking for a long, advanced course in glasswork. The session lasts about 90 minutes, and the project is a single six-inch piece. You can expect an introduction to a variety of techniques, but the available details do not suggest a full technical course or an extended series of lessons.

You may also want to think about how you feel when a creative project has no single right answer. The freedom to design your own work is a strong point, but it asks you to make choices. If you prefer a tightly prescribed project, ask the studio whether a sample design or additional guidance is available.

Is $79 good value?

At $79 per person, you are paying for a guided, small-group activity with materials and a finished piece that the studio fires after class. The value is not just in the glass itself. You get a structured introduction, access to color choices, tools, and time to make a design under instruction.

The group limit of six adds value for anyone who wants to ask questions as they work. A larger class could make a hands-on activity feel rushed, while a small group gives the instructor more opportunity to help each person. Still, the price may feel high if you mainly want a quick craft activity or expect to leave with the finished artwork that day.

Check whether shipping has an additional cost if you will not be able to return to Everett. The information confirms that shipping is possible but does not say whether it is included in the $79 price.

Getting to the Everett studio

The meeting point is FEELartistic Studio, at 10333 19th Ave SE, Suite 101, Everett, Washington. Although the experience is presented as being in Seattle, the studio address is in Everett, so check the route and travel time from where you are staying before making plans.

The activity begins and ends at the studio. It is near public transportation, though the specific routes are not provided. Booking confirmation is issued at the time of booking, and the experience is offered in English. It is usually booked about 13 days ahead, a useful planning guide rather than a requirement.

Cancellation is free up to 24 hours before the start time. A cancellation within 24 hours is not refundable, and changes inside that window are not accepted. The activity also has minimum-participant and good-weather conditions; if it is canceled for either reason, you will be offered another date or experience, or a full refund.

Should you book this glass-fusing class?

Book it if you want a hands-on, beginner-friendly creative session, enjoy making your own design, and are comfortable collecting or receiving your artwork later. The small group, clear instruction, and chance to work with both transparent and opaque glass make the $79 price easier to justify for someone who values guidance as well as materials.

Before booking, confirm the current firing and pickup schedule, ask about shipping costs if needed, and check the color selection if you have a particular palette in mind. If you need a finished object the same day, choose another activity. If you are happy to leave your design in the studio for firing, this is a distinctive way to spend 90 minutes making something that is yours.

FAQ

Where does the class take place?

It meets at FEELartistic Studio, 10333 19th Ave SE, Suite 101, Everett, Washington. The activity ends back at the meeting point.

How long is the class?

The class lasts approximately 1 hour and 30 minutes.

Do I need previous glass-fusing experience?

No. The class is open to beginners and to people who have taken a beginning class before and want a refresher.

What will I make?

You will design a six-inch contemporary fused-glass piece using smaller pieces of glass arranged on a clear square.

Do I take my artwork home at the end?

No. The studio fires your creation after class. It can be picked up later or shipped.

How many people can join?

The maximum group size is six participants.

What is the cancellation policy?

You can cancel at least 24 hours before the start time for a full refund. Cancellations within 24 hours are not refundable, and changes made during that period are not accepted.